OptiMate Pro-8 12V
|
|
|
Unique Battery Charger / Optimiser for up to 8 batteries. |
|
|
PRO8 |
|
|
£350.00 + VAT FAQ, PRODUCT COMPARISONS,
ETC. |
OptiMate
Pro 8-S - the unique 8-battery optimiser which can automatically recover
deep-discharged batteries. Now with new
DUAL PROGRAM to select different charging programs for Engine Start & Deep
Cycle batteries.
All batteries
connected will be automatically assessed, recovered, charged & tested -
within hours. Charges all lead-acid batteries from 3Ah to 55Ah and will
maintain batteries from 3Ah to 90Ah.
This range covers everything from standby batteries in burglar alarm
panels, to motorcycle & powersport batteries through to medium car
batteries.
OptiMate
Pro 8-S is the perfect tool for battery and second hand vehicle dealers and is
the ultimate battery management centre!
·
Automatically assesses, recovers, charges, tests, up to 8
batteries simultaneously.
·
For all 12V lead-acid batteries - lead-antimony,
lead-calcium, sealed "MF", or "Gel" types.
·
Batteries of different types, sizes and condition can be
dealt with simultaneously.
·
Automatic individual detection and recovery mode for
deep-discharged batteries (from as low as 2V).
·
Detection of "shorted cell" type defects.
·
Each battery individually optimised through electronic
current and voltage monitoring.
·
Sensing circuitry eliminates over-charging. No gassing
possible!
·
Unique "double-check", circuitry ensures quickest
optimal charge regardless of battery condition.
·
Automatic individually applied test for excessive rate of
self-discharge.
·
Clear and simple battery status indicator panel for each
battery. One glance is all that's needed.
·
1.2 Amp constant current charge, then constant voltage float
charge to keep batteries fresh and ready to go.
·
Reliable, field-proven OptiMate hi-tech circuit design.
·
Full automatic electronic protection against inverse
polarity connection & short-circuit. There are no fuses to replace.
·
So safe, it is impossible to generate a spark, even by
short-circuiting.
NB OptiMate
Pro-8-S can use the standard range of OptiMate & AccuMate accessory leads
and connection options BUT because the connectors are inverted on this
charger (male - female) a special converter / extension lead is required. These
2.5 m converter leads are part number TM79 and are £3.00+VAT each or £20.00+VAT
for a set of 8 and will work with all the AccuMate accessory leads. These are
2.5m long to allow the Pro-8 to be wall mounted and the vehicles / batteries
can be several metres away.
An
optional wall-mounting bracket (Part No. BM-BRACKET) is available to install
the Pro-8 above a workbench. Saves valuable bench space for batteries and keeps
the Pro-8 away from acid contamination.
Price is £18.00+VAT
See technical library for
information regarding battery charging technology and product comparisons.
E-Mail: Sales@AccuMate.co.uk